Kenwood RC-D710

From APRSWiki
(Difference between revisions)
Jump to: navigation, search
m (Reverted edits by Reverse22 (talk) to last revision by UR3IRS)
 
(3 intermediate revisions by 2 users not shown)
Line 11: Line 11:
 
* Replaces [[TM-V71A]] control panel to enable all [[TM-D710A]] features
 
* Replaces [[TM-V71A]] control panel to enable all [[TM-D710A]] features
 
* Packet data output/input using PC
 
* Packet data output/input using PC
* [[NMEA]]-0183 [[GPS]] receiver ready
+
* [[NMEA 0183]] [[GPS]] receiver ready
 
* APRS weather station ready
 
* APRS weather station ready
 
* APRS configuration possible on PC running [[MCP-2A]]. Memory Control Program (requires [[PG-5G]])
 
* APRS configuration possible on PC running [[MCP-2A]]. Memory Control Program (requires [[PG-5G]])
 
* Large full dot-matrix LCD with 2 backlight colors
 
* Large full dot-matrix LCD with 2 backlight colors
 
* Firmware upgrading (requires [[PG-5G]])
 
* Firmware upgrading (requires [[PG-5G]])
 
== Links ==
 
* [http://www.kenwoodusa.com/Communications/Amateur_Radio/Mobiles/RC-D710 Kenwood RC-D710]
 
  
 
== Supported Models ==
 
== Supported Models ==
Line 30: Line 27:
 
* [[Kenwood TM-255A]]
 
* [[Kenwood TM-255A]]
 
* [[Kenwood TM-455A]]
 
* [[Kenwood TM-455A]]
 +
 +
== Links ==
 +
* [http://www.kenwoodusa.com/Communications/Amateur_Radio/Mobiles/RC-D710 Kenwood RC-D710]
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]

Latest revision as of 18:44, 30 December 2011

Kenwood C-D710

Kenwood RC-D710 - The APRS® upgrade for your transceiver

Kenwood RC-D710 - TNC for 1200/9600 bps packet communications. The RC-D710 operates as an AX.25-compliant TNC (Terminal Node Controller) for 1200/9600 bps packet communications.

[edit] General Features

  • Built-in 1200/9600 bps TNC
  • APRS (Automatic Packet Reporting System) ready
  • Connects via optional interface kit (PG-5J) to a transceiver to enable APRS. Note: Since the RC-D710 connects to the data terminal of your transceiver, control of another transceiver is not possible. Also, please be aware that Kenwood cannot guarantee the performance of the transceiver to which the RC-D710 is connected.
  • Provides full control of Kenwood’s TM-V71A & TM-D710A
  • Replaces TM-V71A control panel to enable all TM-D710A features
  • Packet data output/input using PC
  • NMEA 0183 GPS receiver ready
  • APRS weather station ready
  • APRS configuration possible on PC running MCP-2A. Memory Control Program (requires PG-5G)
  • Large full dot-matrix LCD with 2 backlight colors
  • Firmware upgrading (requires PG-5G)

[edit] Supported Models

[edit] Links

Personal tools