Paths

From APRSWiki
(Difference between revisions)
Jump to: navigation, search
(Norway)
Line 86: Line 86:
  
 
[http://www.rlx.lu/lx_aprs.htm http://www.rlx.lu/lx_aprs.htm]
 
[http://www.rlx.lu/lx_aprs.htm http://www.rlx.lu/lx_aprs.htm]
 +
 +
=== Czech Republic ===
 +
 +
* WIDE1-1,WIDE2-2 :Mobile trackers
 +
* WIDE2-2 :Home stations
 +
 +
[http://www.hamradio.cz/aprs_new/index.php  http://www.hamradio.cz]
  
 
=== Germany ===
 
=== Germany ===

Revision as of 02:11, 1 September 2009

Stub for recommendations on setting digipaths (aka unproto paths)

IMPORTANT : We need information on recommended settings for all regions, and links to understanding new paradigm information. RECOMMENDATION: Most of this regional info should be transferred to the new regional info pages and content added there about local protocols.

Contents

Recommended Path Settings for:

MOBILE Stations in North America (VHF)

  • WIDE1-1,WIDE2-1  :Two hops in all directions with potential to use fill-in digis. Best path for mobile use in most all areas.
  • WIDE1-1,WIDE2-2  :Three hops with potential to use fill-in digis. Use only if truly needed while very far from any mountain digis or cities.

FIXED Stations in North America (VHF)

  • WIDE2-1  :One hop... suitable if you are within earshot of a "high" WIDEn-N digi with a large footprint.
  • WIDE2-2  :Two hops in all directions... recommended maximum for routine and courteous use in most areas.
  • WIDE3-3  :Three hops in all directions... only for very sparsely populated areas far from any mountain digis or cities. Many digis in populated areas will only give one hop to paths of WIDE3-3 (and broader).

RELAY and WIDE and TRACE and TRACEn-N are obsolete.

For details and explanation, visit Bob WB4APR's WIDEn-N Paradigm web page.

HF Stations, max routine

  • GATE, WIDE2-1: Recommended for HF APRS, **DO NOT USE** on VHF.

You can see a bad example of path overkill here.

Mobile Stations in Australia (VK)

  • For VK6 & VK8 use RELAY,WIDE2-2
  • For VK1, VK2, VK3, VK4 & VK5 use WIDE1-1,WIDE2-1
  • For VK7 use WIDE1-1,WIDE2-2 TASn-n also supported.
  • On HF use GATE, WIDE2-1 **DO NOT USE** on VHF.
  • On APRS Satellites use ARISS,SGATE,WIDE

Visit the appropriate state's web page at the Australian APRS site for further details.

Ireland (EI)

  • WIDE1-1, WIDE2-2 for Mobile Stations. Two hops with support for Fill-in digis
  • WIDE2-2 for Base Stations. Two hops no support for Fill-in Digis. Packets should make it to an Igate.

If you want to discuss/or disagree with the settings/want to try something else, Please contact either EI7IG or EI8JA.

UK/EU

Home Stations (UI-View Style)

  • APRS,WIDE2-2

Mobiles (Packet Path)

  • WIDE1-1,WIDE2-1

IGATEs (UI-View Style)

  • APRS,WIDE2-1

http://www.apritch.myby.co.uk/uiview_newn-n.htm

New Zealand

  • WIDE1-1,WIDE2-2 :Mobile trackers
  • WIDE3-3 :Home stations

http://zlhams.wikidot.com/aprsrecommendations:recommendations

Norway

  • WIDE1-1,WIDE2-2 :Mobile trackers
  • WIDE3-3 :Home stations
  • WIDE2-1 : Igates

Bruker man UI-View:

  • APRS,WIDE1-1,WIDE2-2 :Mobile trackers
  • APRS,WIDE3-3 :Home stations

http://www.aprsla.net/aprs_tech.html#unproto

Poland

  • WIDE1-1,WIDE2-2 :Mobile trackers
  • WIDE3-3 :Home stations

http://www.aprs.pl/europe.htm

Luxembourg

  • WIDE1-1,WIDE2-2 :Mobile trackers
  • WIDE4-4 :Home stations

http://www.rlx.lu/lx_aprs.htm

Czech Republic

  • WIDE1-1,WIDE2-2 :Mobile trackers
  • WIDE2-2 :Home stations

http://www.hamradio.cz

Germany

  • WIDE1-1,WIDE2-1 :Mobile trackers
  • WIDE2-2 :Home stations

http://www.aprs-dl.de/index.php?Umstellung_NEWn-N:NEWn-N-Paradigm

JAPAN

  • WIDE1-1,WIDE2-1 (WIDE1-1 in KANTO):Mobile trackers
  • WIDE2-1 (or No Path)  :Home stations

[JAPRSX http://japrsx.com]

Personal tools