View source for Profile Switching

[[Otwincfg.exe|Back to manual]]

== High APRS Digipeater ==
To configure for a high or low digi only, you probably will not need profile switching as we normally use it for a tracker.  Unless of course you want to switch profiles to alert you as to a high or low temperature event or a low voltage situation.  The temperature probe is built into the [[Tracker2]] but there is none in the [[T2-135]].  Normally the screen will look like this below.

[[Image:ProfileSwitchingHighDigi.jpg]]

== Setup as a Tracker ==
Need more info here, some various thoughts on what you might want to switch on.  Also comment on KISS and profile switching.

This profile is set up to send a different text message when there is no GPS fix - Profile 2.

[[Image:profileSwitchingTracker.jpg]]