Profile Switching

From APRSWiki
(Difference between revisions)
Jump to: navigation, search
Line 2: Line 2:
  
 
== High APRS Digipeater ==
 
== High APRS Digipeater ==
To configure for a high or low digi only, you probably will not need profile switching as we normally use it for a tracker.  Unless of course you want to switch profiles to alert you as to a high or low temperature event or a low voltage situation.  The temperature probe is built into the Tracker2 but there is none in the T2-135.  Normally the screen will look like this below.
+
To configure for a high or low digi only, you probably will not need profile switching as we normally use it for a tracker.  Unless of course you want to switch profiles to alert you as to a high or low temperature event or a low voltage situation.  The temperature probe is built into the [[Tracker2]] but there is none in the [[T2-135]].  Normally the screen will look like this below.
  
 
[[Image:ProfileSwitchingHighDigi.jpg]]
 
[[Image:ProfileSwitchingHighDigi.jpg]]

Revision as of 11:20, 2 February 2009

Back to manual

High APRS Digipeater

To configure for a high or low digi only, you probably will not need profile switching as we normally use it for a tracker. Unless of course you want to switch profiles to alert you as to a high or low temperature event or a low voltage situation. The temperature probe is built into the Tracker2 but there is none in the T2-135. Normally the screen will look like this below.

ProfileSwitchingHighDigi.jpg


Setup as a Tracker

Need more info here, some various thoughts on what you might want to switch on. Also comment on KISS and profile switching.

This profile is set up to send a different text message when there is no GPS fix - Profile 2.

ProfileSwitchingTracker.jpg

Personal tools