Profile Switching

From APRSWiki
Revision as of 18:42, 27 September 2008 by Anonymous (Talk)

Jump to: navigation, search

Back to manual[[1]]

High APRS Digipeater

To configure for a high or low digi only, you probably will not need profile switching as we normally use it for a tracker. Unless of course you want to switch profiles to alert you as to a high or low temperature event or a low voltage situation. The temperature probe is built into the Tracker2 but there is none in the T2-135. Normally the screen will look like this below.

ProfileSwitchingHighDigi.jpg

Personal tools