TinyTrak SMT

From APRSWiki
(Difference between revisions)
Jump to: navigation, search
 
(One intermediate revision by one user not shown)
Line 1: Line 1:
 +
[[Image:Ttsmt.jpg|thumb|px250|right|TinyTrak SMT]]
 
'''TinyTrak SMT''' is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.
 
'''TinyTrak SMT''' is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.
 +
 +
== Links ==
 +
* http://www.byonics.com/tinytrak/ttsmt.php
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]

Latest revision as of 07:24, 14 June 2009

TinyTrak SMT

TinyTrak SMT is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.

[edit] Links

Personal tools