Difference between revisions of "TinyTrak SMT"

From APRSWiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
[[Image:Ttsmt.jpg|thumb|px250|right|TinyTrak SMT]]
 
'''TinyTrak SMT''' is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.
 
'''TinyTrak SMT''' is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.
 +
 +
== Links ==
 +
* http://www.byonics.com/tinytrak/ttsmt.php
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]

Latest revision as of 08:24, 14 June 2009

TinyTrak SMT

TinyTrak SMT is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.

Links[edit]