TinyTrak SMT

From APRSWiki
(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
 
'''TinyTrak SMT''' is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.
 
'''TinyTrak SMT''' is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.
 +
 +
== Links ==
 +
* http://www.byonics.com/tinytrak/ttsmt.php
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]

Revision as of 08:22, 14 June 2009

TinyTrak SMT is a surface mount version of the popular TinyTrak3 GPS Encoder. It is a built device, 1" x 0.925" and 0.16" tall, with 4 LEDs, 2 pots, and there are no connectors, but rather 8 holes spaced 0.1" apart for connections to power, radio, and serial. TinyTrak SMT is programmed with the latest version of the TinyTrak or WXTrak firmware, and uses the same configuration software.

Links

Personal tools